Panametrics UTX878

The AquaTrans UTX878 is a loop-powered clamp on flow meter suitable for measurement of:

  • potable water
  • waste water
  • discharge water
  • treated water
  • cooling and heating water
  • other liquids

The UTX878 boasts low power consumption and is loop-powered. It is suitable for pipes of 15mm to 200mm diameter (1/2 inch to 8 inch). The flow meter also has a full external keypad, large display, and is able to measure velocity, volumetric and totalised flow. The UTX878 is an economical flow meter using highly developed technology for accurate measurement.

How Does It Work?

A single cable carries both power to the meter and flow information back to the control system. There is an optional second channel available on the UTX878, which enables the capability to measure flow at a single point to obtain two-path averaging of the flow measurement for increased accuracy.

The UTX878 uses Correlation Transit Time technology, using a pair of transducers with each one sending and receiving ultrasonic signals through the liquid. When the liquid is moving, the signal send downstream will be shorter than the distance upstream. The difference between these is proportional to the flow.

Fluid Types Acoustically conductive fluids, including most clean liquids, and many liquids with a small amount of entrained solids or gas bubbles.
Pipe Sizes 1/2 inch to 8 inch (15 to 200mm)
Pipe Wall Thickness Up to 0.5 inch (13mm)
Pipe Materials All metals and plastics.
Flow Accuracy

Pipe ID less than or equal to 6 inch (150mm): +/- 1% to 2% of reading typical.

Pipe ID more than or equal to 6 inch (150mm): +/- 2% to 5% of reading typical.

Repeatability +/- 0.1% to 0.3% of reading
Range (bidirectional) -40 ft/s to 40 ft/s (-12.2 m/s to 12.2 m/s)
Rangeability (Overall) 400:1
Flow Measurement Patented Correlation Transit-Time mode
Enclosure Epoxy-coated aluminium weatherproof Type 4X IP67
Dimensions

Size 8.8 in x 8.2 in x 3.6 in (220 mm x 210 mm x 90 mm)

Weight 3.9 lb (1.77 kg)

Display 128 x 64 pixel LCD graphic display
Keypad 6 button external keypad
Power Supply 15 to 30 VDC loop power
Memory

FLASH memory, field upgradable

Operating Temperature -4 deg F to 140 deg F (-20 deg C to 60 deg C)
Storage Temperature -4 deg F to 158 deg F (-20 deg C to 70 deg C)
Standard Inputs / Output One 4 to 20 mA on power loop
Digital Interface RS232
European Compliance System complies with EMC Directive 89/336/EEC
Temperature Range -40 deg F to 194 deg F (-40 deg C to 90 deg C)
Mounting Stainless steel strap
Area Classification General purpose

Download Product Specification Download PDF
Download User Manual Download PDF

 

Select Options
Quote me for
Instrument(s) required by: (Date)
Quantity