The SS Mini-Monsoon pump is capable of pumping up to 100 ft from ground level, powered simply by a 12 volt battery. Its advancements in technology means it is suited for harsh environments. It is manufactured from three high polished stainless steel parts: replaceable motor module, motor housing top connector and outside pump housing.
This pump can provide over 400 hours of operation under normal working conditions. It is ideal for ground water purging and long term remediation sites.
The SS Mini Monsoon pump is a suitable substitute for engineered plastic pumps. Not only is it easy to use but it is simple to clean and decontaminate.
This pump has become renowned for its unique design. It features a '30 second change out motor design'. This means that if the existing motor module fails on site, a new one can be installed within 30 seconds, from a simple quarter turn twist. The new motor module will give the pump the same life span as a new pump.
Manufactured by: Proactive Environmental Products
Model: Stainless Steel Mini-Monsoon DTW 100ft
|Power Consumption||285 Watts (Max)|
|Volt Recommendation||12-15 At Source|
|Maximum Amp Output||17 Amps|
|Measurements||Length 7.5"/ Diameter 1.82"|
|Constructed||High Polish Stainless Steel|
|Required Tubing||3/8" ID Low Density Polyethylene Tubing|
|Supplied With||110 feet of heavy duty 10 gauge wire with alligator clamps|
|Required Booster||Mini-Monsoon 100 Booster|
|Pumping Depth (DTW)||Gallons Per Minute|