The Stainless Steel Monsoon pump has a unique design, making it both simple to use and powerful. It is capable of pumping up to 120 feet from ground level to water level, powered by a simple 12 volt battery. This reliable pump is well suited for continuous purging of groundwater wells.
The Stainless Steel Monsoon pump can operate under the harshest conditions with higher turbidity. It can also be installed with solar panels for long term remediation sites.
This pump is constructed with three high polished stainless steel parts: replaceable motor module, motor housing top connector and outside pump housing. Its advancements in technology now includes a '30 second change out motor design'. If the motor ever failed on site, with a simple quarter turn twist a new motor module can be installed under 30 seconds. Once installed the pump will be essentially new.
Manufactured by: Proactive Environmental Products
Model: Stainless Steel Monsoon DTW 120ft
|Power Consumption||570 Watts (Max)|
|Volt Recommendation||12-15 At Source|
|Maximum Amp Output||32 Amps|
|Measurements||Length 7.5"/ Diameter 1.82"|
|Constructed||High Polish Stainless Steel|
|Required Tubing||3/8" ID Poly Tubing|
|Supplied With||130ft of heavy duty 12 gauge wire neatly rolled up on a tubular metal reel with pump holder, 2 motor modules, disposable low flow control valve and wrench|
|Pumping Depth (DTW)||Gallons Per Minute|