Alpha pH 2000D pH/ORP Controller/Transmitter

  • Warranty This product comes with a one year warranty
  • New Enhanced Superb Accuracy New improvements enhance the already superb quality of this product
  • Cost Effective Cost-saving pH measurement system for demanding environments
Product Options

Overview

RS Hydro are proud to be UK distributors of the improved Eutech Alpha pH 2000D Controller/Transmitter and combination electrode system which uses a unique system that ensures more resistance to contamination or fouling in harsh wastewater applications. The improved system uses a pH glass bulb in place of the conventional reference system this enables a wide pH range of -2.00 to 16.00 pH at two decimal accuracy. Replaceable salt bridge and reference solution add lifespan to the electrode when junctions clog.

This instrumentation can be used to control and measure pH and ORP simultaneously with master-slave operation by placing two controllers side by side and when used in ORP mode is capable of measuring in mV or % concentration, which feature independent calibration modes.

The pH Differential Electrode:

  • Any buffer standard from 2 to 10 pH can be used which is very useful for applications that require adjustable isopotential points
  • A built in temperature electrode called Automatic Temperature Compensation is a standard feature on this item
  • Built-In Electronic Amplifier provides a low impedance output from the electrode, and allows analyzers to be located up to 3000 feet away from the electrode
  • Ground Rod Minimizes Electrical Interference from pumps, transformers, motors and ground currents

The Eutech Aplha pH 2000D Controller/Transmitter and combination electrode system is able to be wall mouted, pipe mounted or panel mounted depending on the application. The compact design of the electrode and the universal 1.5" NPT mounting threads enable optimal mounting positions.

This is the perfect piece of equipment if you require a reliable, long lasting and cost-saving pH measurement system for demanding environments.

Manufactured by: Eutech Instruments
Model: Alpha pH 2000D pH/ORP Controller/Transmitter

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

General
Useful for any batch or on-line type application that requires accurate pH or ORP control
Industrial
Ideal for chemical processing, aquarium, pharmaceutical, food processing, waste control industries and hydroponics
Water Purification/Treatment
Use for batch and on-line control of incoming process water, rinse water treatment, waste water treatment and recirculating system
Regulatory
Hook to recorder to document data for regulatory compliance

Specification

pH
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.01 pH
ORP
Range -1000 to 1000 mV / 0 to 100 %
Resolution 1 mV / 0.1 %
Accuracy ±1 mV / ±0.2 %
Temperature
Range -10.0 to 110 °C / 14.0 to 230.0 °F
Resolution 0.1 °C / 0.1 °F
Accuracy ±0.5 °C / ±1.0 °F
Sensor NTC 300; 2 wire
Compensation Auto/manual (independent process/CAL temperature)
Set Point and Controller Functions
Set Point 1 (SP1)/ Set Point 2 (SP2) -2.00 to 16.00 pH or -1000 to 1000 mV or
0 to 100 %
Switching pH Hysteresis 0.1 to 1 pH
Switching ORP Hysteresis 10 to 100 mV or 1 to 10.0 %
Function (Switchable) P/PI control (pulse length/pulse frequency/proportional integral); limit control; off
Adjustable Period with Pulse Length Controller 0.5 to 20 sec
Adjustable Period with Pulse Frequency Controller 60 to 120 pulse/min
Integral Action Time (IAT) 0 to 999.9 min
Pickup/Dropout Delay 0 to 2000 sec
Wash Cycle 0.1 to 200.0 hr
Wash Duration 1 to 2000 sec
Contact Outputs 1 SPDT, 3 SPST relays
Switching Voltage / Current / Power 1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
Alarm Functions
Function (Switchable) Steady or fleet (pulse)
Pickup Delay 0 to 2000 sec
Switching Voltage / Current / Power 1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
Alarm Functions
Function (Switchable) Steady or fleet (pulse)
Pickup Delay 0 to 2000 sec
Switching Voltage / Current / Power 1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
Electrical Data and Connections
Transmitter Function Two 0/4 to 20 mA scalable outputs for pH/ORP and temperature, galvanically isolated
CU22 Function 22 mA current output
Isolated Output Voltage 12 V ±0.5 V (max. 50 mA)
Hold Function Switch To freeze output current and deactivate control relays
Load Max. 600 Ohm
pH / ORP Input 2-pin terminal (Differential)
Connection Terminal 5-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks
Display
LCD UV coat, backlit 14 segments display with symbols for status information
Backlight On/off selectable with four levels of brightness control
Power Supply
Input 80 to 250 VAC/DC ; 50/60 Hz ; 10 VA
Main Fuse 315 mA time delay, 250 V,
Bussmann BK/GDC-315 mA
Pollution Degree 2
Transient Overvoltage Category II
EMC Specifications
Emitted Interference According to EN 61326
Immunity to Interference According to EN 61326
Environmental Conditions
Operating Temperature Range 0 to 40 °C
Max. Relative Humidity 80 % up to 31 °C decreasing linearly to 50 % at 40 °C
Mechanical Specifications
Dimensions (WxHxD) 144 x 144 x 110 mm
Weight 950 g (unit) / 1100 g (packed)
Ingress Protection IP66 (NEMA 4X)

Downloads