PC 650 CyberScan - Eutech Instruments

CyberScan PC 650

  • Multi-Parameter Measurements Conductivity, pH and temperature measurement in one handheld meter
  • Auto-Logging Meter Auto-logging meter automatically saves readings within seconds to prevent data from being lost
  • Waterproof and Dustproof IP67 housing makes the PC 650 ideal for harsh environments
Product Options
ECPCWP65043K

Overview

The Eutech CyberScan PC 650 is a rugged device ideal to be used in the field, it is easy to set up using the prompt on screen messages. It has a selectable multi-point calibration option for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes. The in built calibration alarm means there will be no more out-dated calibration settings.

Recorded readings are individually stamped with time and date in GLP compliant format, the transfer of this data is a simple procedure at the press of a button using wireless information technology.

The CyberScan PC 650 provides ±1% full scale accuracy at 3 decimal resolution across a wide measurement range, Ion-measurement capabilities with 3 digit resolution and it accepts two cell and four cell conductivity probe to measure up to 500m/s - meter measures pure water! Fitted with a HI-LO limit alarm for easy quality control, the meter alerts when readings fall outside selected ranges.

Auto logging saves readings automatically within seconds to prevent data loss and the non-volatile memory protects information and meter settings even when batteries run out.

Four levels of password protection prevents tampering ot accidental data deletion.

Manufactured by: Eutech Instruments
Model: CyberScan PC 650

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Environmental: water quality monitoring, monitoring health of aquatic ecosystems, groundwater drinking supplies, and meet EPA regulations.
Water quality testing: Water analysis of hard water, drinking water, effluent water and process water.
Industrial: For checking metal finishing, printing fountain solutions, cooling tower water, boiler water, rinse tanks, pollution control, waste water and industrial process solutions. Ideal for quality assurance testing and food analysis.
Aquacultural: monitoring oxygen levels in fish farming applications.

Specification

pH Range -2.000 to 20.000 pH
Resolution & Accuracy 0.1/0.01/0.001 pH & ±0.002 pH
No. of pH Calibration Points 1 (Offset) to 6 points
pH Buffer Options USA, NIST, DIN, PWB, Custom
mV Range ±2000.0 mV
Resolution & Accuracy 0.1 mV & ±0.2 mV
Ion Concentration Range 0.001 to 19900
Resolution & Accuracy 2 or 3 digits & ±0.5% FS (mono); 1% FS (div)
No. of Ion Calibration Pts Up to 8
Conductivity Range .. to 500 mS/cm
Resolution & Accuracy 0.05% FS & ±1% FS + 1 LSD
Cell Constant 0.010 to 10.000
Temperature Coefficient Linear & Pure
TDS Range .. to 500.0 ppt
Resolution & Accuracy 0.05% FS & ±1% FS +1 LSD
Salinity Range 0 to 80 ppt
Resolution & Accuracy 0.05% FS & ±1% FS +1 LSD
Temperature Range -10.0 to 110.0 °C / 14.0 to 230.0 °F (Meter)
Resolution & Accuracy 0.1 °C/°F & ±0.5°C/ ±0.9°F
Temperature Compensation Automatic / Manual (0 to 100 °C)
Memory 500 Data Sets with Date/Time stamping & Security password protection
Output IrDA Wireless Communications
Display Multi-data Back-lit dot matrix; 7.2 cm (H) X 5.4 cm (W)
Special Functions Auto-Calibration; Data-logging options with time/date indexed, GLP compliance; Simultaneous Display and measurement of 4 parameters; Cal-due alarm; pH slope/offset Display & Self-diagnostic
Power 4 X 1.5 V "AA" Alkaline batteries or 9 V DC adapter, 500 mA

Downloads

Accessories