Here at RS Hydro we have introduced the INW DO2 Sensor to our expanding range of dissolved oxygen equipment.This sensor is the next generation in oxygen sensing, providing precision optical transmission and detection to measure oxygen concentration in the fluid outside of the sensor. The slim 1.66”diameter body fits easily in to 2 inch wells.
The convenient feature of the INW DO2 Sensor is it does not require frequent calibration has no requirement for membranes, fill solutions, replacement caps or cartridges resulting in a very simple to use piece of equipment.
Complete with integrated datalogger and Aqua4Plus software results in the INW DO2 Sensor providing convenient and high quality data, with the capacity to hold over 170,000 records in the non-volatile memory.
Manufactured by: INW
Model: DO2 Sensor
Dam discharge monitoring aquaculture
Leachate monitoring (landfill)
Long-term surface water monitoring
Monitoring remediation performance
Municipal and industrial water treatment facilities
GENERAL | |
Probe Diameter | 1.66�????�???�??�?�¢?? (4.22 cm) |
Tube Material | Acetal & 316 stainless steel or titanium |
Probe Material | Epoxy, polyurethane, and PVC |
Wire Seal Material | Fluoropolymer and PTFE |
Submersible Cable | Polyurethane, polyethylene, or FEP available |
Terminating Connector | Available |
Communication | RS485 Modbus® RTU |
Direct Modbus Read Output | 32-bit IEEE floating point |
Internal Math | 32-bit floating point |
Operating Temp. Range | 0° C to 55° C |
Storage Temp. Range1 | -40° C to 80° C |
LOGGING | |
Memory | 260,000+ records |
Log Types | Variable, user-defined, logarithmic, profiled |
Programmable Baud Rate | 9600, 19200, 38400 |
Logging Rate | 8x/sec maximum |
Software | Complimentary Aqua4Plus or Aqua4Push |
Networking | 32 available addresses per junction w/ batching capabilities (up to 255) |
File Formats | .xls / .csv / .a4d |
SENSOR | |
Measuring Range | 0 - 25 ppm |
Accuracy | 1% of reading or 0.02 ppm �?????�????�???�??�?�¢?? whichever is greater |
Sensitivity / Resolution | 0.01 ppm below 4.00, 0.1 ppm above 4.0 |
Stability | 0.01 ppm |
Repeatability | 0.01 ppm |
Sensor Drift | Less than 1% per year |
Temperature Range | 0° C to 55° C |
Response Time | 95% in less than 60 seconds |
Maximum Pressure | 100 PSI |
POWER | |
External Power Pack Required | 9-15VDC |