RS Hydro stock Siemens 5100/6000 Magflo Meters

MAG 5100W Magflo Meter

  • Easy to Commission SENSORPROM unit automatically uploads calibration values and settings
  • MCERTS Suitable for MCERTS applications in the UK environmental market
  • Wide Range of Sizes Available Sizes from DN 15 to DN 1200 / 2000
  • IN STOCK Wide range available for next day delivery (if paperwork received before 12noon previous day)
Product Options
7ME6520-2DF12-2AA1

Overview

With a hard elastomer rubber lined bore, the MAG 5100W magflo meter is suitable for all water applications including those with very low flow rates. It can be used for DN25 to 1200 (1 inch to 48 inch). The kit is supplied as standard complete with integral grounding electrodes.

The hard lining guarantees consistent accuracy throughout the temperature and pressure range, whilst the soft elastomer facing provides high abrasion resistance and eliminates the need for gaskets. It is highly resistant to a wide range of chemicals.

MCERTS

The Siemens MAG 5100W is now MCERTS certified meeting the Environment Agency's performance requirements. View downloads for certificate.

Manufactured by: Siemens-Milltronics
Model: MAG 5100W Magflo Meter

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Water abstraction
Water treatment
Water distribution network (leak detection management)
Custody transfer water meters
Irrigation
Waste water treatment
Filtration plant (e.g. reverse osmosis and ultra filtration)
Industrial water applications

Specification

Measuring Range 0 to 10 m/s
Nominal Sizes From DN 25 to DN 2000 (1” to 78”)
Accuracy 0.2 % ±2.5 mm/s
Operating Pressure Max. 16 bar (Max. 150 psi)
Ambient Temperature From -40 to 70 °C (-40 to 158 °F)
Medium Temperature From -10 to 70 °C (14 to 158 °F)
Liners EPDM
NBR hard rubber
Ebonite hard rubber
Electrodes Hastelloy C-276
Built-in grounding electrodes
Material Carbon steel, with corrosion resistant
two-component epoxy coating
Drinking Water Approvals EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,
ACS and BelgAqua
NBR: NSF/ANSI Standard 61, WRAS
Ebonite: WRAS
Custody Transfer Approvals OILM R 49
MI-001
General Approval MCERTS Sira Certificate No. MC080136/00

Downloads

Accessories

Related products

Certificates

FAQ's

Yes, the ordering process is very easy. Orders can be made via purchase order or by credit/debit card. Once we have the paperwork we can delivery next day to any location in Europe. Provided with the equipment is a quick start guide, and if you need extra support, the technical support engineers can be contacted via phone call.
Every flow meter is tested upon shipping and return as part of our ISO9001 procedure. Also, as part of this procedure, the flow meter is calibrated once a year. If a copy of the calibration certificate is needed let us know.
We are here to help. If the self-help and quick start guides do not help, then call one of our technical support engineers on +44 (0) 1527 882060. We have supplied and supported many clamp on rental installations throughout Europe.
If the stock is permitting, and all paperwork is received by 12pm then flow meters can usually be available the next day.
Without exception, all our flow meters are tested. If you need a 110v plug instead of the standard 230v plug let us know.
As long as the pipe is relatively clean, coatings or paint is usually not a problem for clamp on flow meters but if the pipe is corroded or the paintwork has bubbled then a quick sanding down with sandpaper or a wire brush is recommended.
An ultrasonic wall thickness gauge, that measures to within 0.05mm, is provided as standard with all flow meter rental packages.
The screendump facility on the integrated dataloggers on all our flow meters, allows you to photograph any screen and download it to your pc.