Siemens-Milltronics FUS080 Transit Time Flowmeter Transmitter

SITRANS FUS080 Transit Time Transmitter

  • High Accuracy +/- 0.5% of flow rate
  • Easy to Commission Easy commissioning with only one button on the display
  • Choice of Power Options Mains or battery powered options available
  • Compatibility Compatible with FUS SONOKIT, FUS380 and FUE380 sensors to make a complete flow meter
Product Options

Overview

The SITRANS FUS080 is a transit time based transmitter that is designed for ultrasonic flowmetering. It can be used in conjunction with any sensor in the FUS in-line series : SONOKIT, FUS380 and FUE380 up to DN 1200. The transmitter is designed to measure flow water applications and there are both battery or mains powered versions available.

The main application for flowmeters with the transmitter SITRANS FUS080 is measurement of water flow in heating plants, local networks, boiler stations, substations, chiller plants, irrigations plants and other general water applications. The type approved flowmeter series for flowmetering in heatmeter custody transfer systems is the SITRANS FUE380.

The FUS 080 is designed with a fiberglass reinforced polyamide enclosure for remote or compact installation in normal areas. The remote versions are available with up to 30 meter distance from flowmeter to transmitter. When ordering as a compact version in the series FUS380 and FUE380 the transducer cables are pre-mounted at the sensor.

Benefits

  • Battery powered up to 6 years
  • Fast measuring frequency 20 Hz/0.5 Hz (230 V AC/Battery)
  • 115/230 V mains powered with back-up battery option in case of mains power failure
  • IrDA optical interface for local communication
  • 2-track measuring principle for optimum accuracy
  • Easy one button straight forward display
  • Compact or remote mounting
  • Measures on all district water qualities and water conductivities
  • No pressure drop
  • Long-term stability
  • 2 galvanic isolated digital outputs for easy connection to a calculator (potential free)
  • MODBUS RTU/RS 232, RS 485 communication modules
  • Bidirectional measurement, with 2 totalizers and outputs
  • Dynamic range Qmin:Qmax up to 1:400

Manufactured by: Siemens-Milltronics
Model: SITRANS FUS080 Transit Time Transmitter

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Heating plants
Boiler stations
Sub-stations
Local networks
Irrigation plants
Other general water applications

Specification

Accuracy ± 0.5% of flow rate
Input/Output Input:
1-, 2-track interfaces
Output:
2 pulse or status
Communication MODBUS RTU protocol:
IrDA optical eye
Additional add-on modules
PDM (Process Device Manager)
Display LCD, 8 digits with additional symbols for information
Enclosure IP67/NEMA 4X/6
Power Supply Battery or Mains (3.6V or 115/230V AC)
Operating Temperature From -5 to 60 °C (23 to 140 °F)
Approvals MID, PTB (depend on system selection)

Downloads

FAQ's

No problem. The quick start guide is designed to make installing the flow meters a simple task. Everything you require for set up will be found in the peli-box supplied with the flowmeter.
Every flow meter is tested upon shipping and return as part of our ISO9001 procedure. Also, as part of this procedure, the flow meter is calibrated once a year. If a copy of the calibration certificate is needed let us know.
The flow meters typically provide an accuracy of ±1 to 2% of rate, so if you are measuring 100l/sec then the accuracy is between 98-102l/sec.
We are here to help. If the self-help and quick start guides do not help, then call one of our technical support engineers on +44 (0) 1527 882060. We have supplied and supported many clamp on rental installations throughout Europe.
If the stock is permitting, and all paperwork is received by 12pm then flow meters can usually be available the next day.
Without exception, all our flow meters are tested. If you need a 110v plug instead of the standard 230v plug let us know.
All of our standard transducers will do -40degC to +150degC, but this will depend on your application.
  • Liquid: below 50mm CFLP transducers are required, 50-1000mm CRS-402 transducers and 150-8000mm CRS-401 transducers. All the bits you need can be supplied, and delivered with the meter.
  • Gas: below 80mm CRS-402 is required, for 80-300mm the CRS-401/CRV-310 and for above 300mm the CRW-312 transducers are required.
  • High temperatures: For liquid we can measure +450degC for liquid and for gas/steam +250degC. But please consult RS Hydro.
As long as the pipe is relatively clean, coatings or paint is usually not a problem for clamp on flow meters but if the pipe is corroded or the paintwork has bubbled then a quick sanding down with sandpaper or a wire brush is recommended.
An ultrasonic wall thickness gauge, that measures to within 0.05mm, is provided as standard with all flow meter rental packages.
The screendump facility on the integrated dataloggers on all our flow meters, allows you to photograph any screen and download it to your pc.
We have hired more ultrasonic clamp on flow meters than any other company in Europe. We are now one of the world's largest distributors of GE Panametrics flow meters. We always review your application before hire so no unwanted surprises are encountered. Every effort has been made to make your flow meter hire and enjoyable experience: quick start guides to help you set up with ease, online videos for further help, rugged packaging for extra durability anywhere, and real flow engineers available for online/telephone support.