The new Panaflow MV 82 is an insertion multivariable vortex mass flow meter, suitable for measuring mass, temperature and pressure. Also allows volumetric flow measurement and density. The MV 82 is capable of measuring most qases, liquids and steam without the need to recalibrate.
The insertion multivariable mass vortex flow meters design consists of a vortex shredding velocity sensor, an RTD temperature sensor and a solid state pressure transducer that measures the mass flow rate of steam, gases and liquids. Most meter types measure temperature and pressure at different points as the devices are not generally installed at the same points. That can mean that mass flow readings can be extremely inaccurate. The MV82 mass flow meter measures these parameters at the same location giving more accurate process measurements.
The MV82 is very cost effective as it integrates pressure and temperature with a simplified system. This saves on initial capital costs and also installation costs. All parameters can be sent straight to your data acquisition system, so there is no need to purchase additional instrumentation.
There are a variety of MV82 vortex flow meters available so the user can choose the option with the most suitable configuration to suit their application.
Manufactured by: GE Panametrics
Model: MV82 Vortex Insertion Flowmeter
High temperature and high velocity steam
Allocation of natural gas
District energy management
Reaction processes heating
Mass balancing
Process Variable | Liquids | Gas and Steam |
---|---|---|
Volumetric Flow Rate | ± 1.2% of Rate | ± 1.5% of Rate |
Mass Flow Rate | ± 1.5% of Rate | ± 2% of Rate |
Temperature | ± 2°F (± 1°C) | ± 2°F (± 1°C) |
Pressure | ± .3% of Full Scale | ± .3% of Full Scale |
Density | ± .3% of Reading | ± .5% of Reading |
Accuracy | Mass flow rate accuracy for gas and steam based on 50-100% of pressure range |
Repeatability | Mass flow rate: ±0.2% of rate Volumetric flow rate: ±0.1% of rate Temperature: ±0.2°F (± 0.1°C) Pressure: ±0.05% of full scale Density: ±0.1% of reading |
Response Time | Adjustable from 1 to 100 seconds |
Process and Ambient Temperature | Process standard temperature: -40 to 500°F (-40 to 260°C) Process high temperature: Up to 750°F (400°C) Ambient operating temperature: -5 to 185°F (-20 to 85°C) Ambient storage temperature: -40 to 185°F (-40 to 85°C) |
Power Requirements | Model MV82-V: |
Display | Alphanumeric 2 line x 16 character LCD digital display Six pushbuttons for full field configuration Pushbuttons can be operated with magnetic wand without removal of enclosure covers Display can be mounted in 90° intervals for better viewing |
Output Signals | Analog: 4-20 mA, loop powered for volumetric meters Alarm: Solid state relay, 40 VDC Totaliser pulse: 50 millisecond, 40 VDC Volumetric: One analog, one totalizer pulse, HART Multivariable: Up to three analog signals, three alarms, one totalizer pulse, HART Multivariable option: Modbus process monitoring |
Wetted Materials | 316L stainless steel, plus: - PTFE-based thread sealant on models with pressure transducer - PTFE packing on standard temperature models with packing gland - Graphite-based packing on high temperature models with packing gland |
Certifications | Explosion-proof for Class I, Division 1, Groups B, C & D Dust-ignitionproof for Class II, III, Division 1, Groups E, F & G Type 4x and IP66 T6 Temperature Class at -40°C - +70°C KEMA ATEX/IEC Ex Approvals II 2 G Ex d IIB + H2 T6 II 2 D Ex tD A21 IP66 T85°C |