Solinst 102 Water Level Meter - Laser Marked Coaxial Cable

  • Affordable Solinst Quality Built ftom rugged, hardwearing corrosive proof components and strong coaxial cable
  • Highly Accurate And Reliable Readings Laser etched markings every millimeter, accurate & traceable to national standards
  • Probe Choices Two probes with segmented weights enables flexibility. PTFE/FEP tipped
  • IN STOCK Next Day Delivery
Product Options


The Solinst 102 Dip Meter is ideal for measuring groundwater levels, especially in piezometers and small diameter tubes where a flexible cable is needed to pass an in well pump. The cable on this water level dip meter has a heavy duty jacket and stainless steel coaxial conductors. The permanent markings on the cable are precisely laser etched on at each millimetre or every 1/100 ft. There is also a 25m mini water level dip meter available ex-stock and we keep a wide range of dip meters available for rental.

Manufactured by: Solinst
Model: Solinst 102 Water Level Meter - Laser Marked Coaxial Cable

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance


Narrow diameter boreholes
Tank measurement



Model 102 Probes are designed for flexibility. The PTFE/FEP tip uses a recessed design to minimize false signals in cascading water.

P4 0.157” dia. x 1.5” long (4 mm x 38 mm) stainless steel weighing 0.35 oz (10 g). It is ideal for accessing narrow diameters, especially the channels of a Solinst CMT System.
P10 3/8” dia. x 1.5” long (10 mm x 70 mm) stainless steel with 10 stainless steel weights, weighing 6.14 oz (174 g). This heavier probe assembly is ideal for greater depths.
Length Options Solinst Model 102 Water Level Meters are available< on reels as shown at right, in the following
standard lengths:
Mini Reel 80 ft / 25 m
Small Reel 100 ft / 30 m
200 ft / 60 m
300 ft / 100 m
500 ft / 150 m
750 ft / 230 m
1000 ft / 300 m


Related products


Solinst offers a weigh kit that consists of 10 weights at 11 grams each (totalling 110 grams), these weights should be threaded at the molex connector end, within the reel. In order to do this the molex contacts on the tape would need to be replaced.