Siemens FM911 Electromagnetic Flow Meter suitable for sludge and slurry

FM911 MagFlow Meter for Sludge & Slurries

  • 911E is ideal for sludges and slurries
  • RS Hydro provide extensive support
  • Total Solution Service Supply/Installation/Commissioning/Maintenance
  • RS Hydro are leading flow specialists
Product Options
FM911

Overview

Benefitting from a fully-welded steel fitting, the 911/E flow meter is suitable for flow velocities up to 12m/s (39.4ft/s). The metering tube liners are available made of hard or soft rubber, PTFE or Novolak. This flowmeter is most commonly used in the industries of pulp and paper, mining, or chemical.

The 911/E flow meter has an pulse alternating field, according to Faradays law where an electric voltage is induced in a conductor moving through a magnetic field.

Manufactured by: Siemens-Milltronics
Model: FM911 MagFlow Meter for Sludge & Slurries

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Pulp and paper industry
Mining industry

Specification

Measuring Range 0 to 10 m/s
Nominal Sizes From DN 15 to DN 1000 (½" to 40")
Accuracy ± 0.5 % of flow rate
Operating Pressure Max. 40 bar (Max. 580 psi)
Ambient Temperature From -20 to 60 °C (-4 to 140 °F)
Medium Temperature From -20 to 150 °C (-4 to 300 °F)
Liners Neoprene
PTFE
Hardrubber
Linatex
Novolak
Electrodes AISI 316 Ti (mat. No. 1.4571/316 Ti)
Hastelloy C4 (mat. No. 2.4610)
Platinum head with shaft (mat. No. 1.4571/316Ti)
Titanium
Tantalum
Enclosure Sensor IP67 (NEMA 4x)
IP68 (NEMA 6) - optional
Material Carbon steel

Downloads

FAQ's

Yes, the ordering process is very easy. Orders can be made via purchase order or by credit/debit card. Once we have the paperwork we can delivery next day to any location in Europe. Provided with the equipment is a quick start guide, and if you need extra support, the technical support engineers can be contacted via phone call.
Every flow meter is tested upon shipping and return as part of our ISO9001 procedure. Also, as part of this procedure, the flow meter is calibrated once a year. If a copy of the calibration certificate is needed let us know.
We are here to help. If the self-help and quick start guides do not help, then call one of our technical support engineers on +44 (0) 1527 882060. We have supplied and supported many clamp on rental installations throughout Europe.
If the stock is permitting, and all paperwork is received by 12pm then flow meters can usually be available the next day.
Without exception, all our flow meters are tested. If you need a 110v plug instead of the standard 230v plug let us know.
As long as the pipe is relatively clean, coatings or paint is usually not a problem for clamp on flow meters but if the pipe is corroded or the paintwork has bubbled then a quick sanding down with sandpaper or a wire brush is recommended.
An ultrasonic wall thickness gauge, that measures to within 0.05mm, is provided as standard with all flow meter rental packages.
The screendump facility on the integrated dataloggers on all our flow meters, allows you to photograph any screen and download it to your pc.