The INW Multi-Parameter Smart Sensor has now been added to our already extensive range of multi-parameter equipment, this sensor is different as it can do the work of six sensors all at the same time. This Multi-parameter is available in 5 standard configurations although custom designs are optional for specific applications.
SDI-12 and Modbus interfaces, integrated datalogger and wireless connectivity to communicate via radios or cellular modems are standard with this INW Multi-Parameter sensor.
For simpler working the sensor is of a modular design which easily accommodates changes to parameter and data needs. Whilst a variety of cable options including polyethylene, polyurethane and FEP are available depending on the application requirements.
The 5 standard configurations are as follows:
Manufactured by: INW
Model: Multiparameter Smart Sensor
Groundwater monitoring
Surface water monitoring
Discharge monitoring
Agricultural runoff
Aquaculture
Remediation performance monitoring
Leachate monitoring
Waste water discharge monitoring
MECHANICAL | |
ADAPTER | |
Material | Acetal |
Strain relief | Included |
SENSOR TUBES | |
Tube Material | 316 stainless steel or titanium |
Wire Seal Materials | Fluoropolymer and PTFE |
CABLE | |
OD | 0.28" (0.7 cm) maximum |
Break Strength | 138 lbs. (62.7 kg) |
Maximum Length | 2000 feet (610 meters) |
Weight | 4 lbs. per 100 feet (1.8 kg / 30 m) |
GENERAL | |
COMMUNICATION | |
Communication | RS485 Modbus RTU SDI-12 (ver.1.3) |
Direct Modbus Read Output | 32-bit IEEE floating point |
SDI-12 Output | ASCII |
Internal Math | 32-bit floating point |
POWER | |
External | 12 VDC |