Street Level Installation tool for ISCO Flow Meters

Street Level Installation Tool

  • Avoid Manhole Entry Install equipment from street level avoiding costly and hazardous manhole entry
  • Multi-Section Pole Manholes up to a depth of 15 ft can be accessed by combining pole sections together
  • Easy Installation and Removal
Product Options


Avoid the expense and potential hazards of manhole entry by installing your monitoring system from street level. Use the Street Level Installation Tool with the following Isco flow and parameter sensors (can also be used with probes from other manufacturers, but may require adapting to fit the mounting rings):

  • Area Velocity Sensors
  • Bubble Lines
  • Submerged Probes
  • pH Probes
  • Temperature Probes
  • Dissolved Oxygen Probes
The kit consists of a mounting ring and a multi-section pole. Pole sections can be combined to access pipes up to a depth of 15ft. To install, simply attach the sensor to the mounting ring and then slide the ring onto the rod at the base of the pole and lower it into the manhole. Pulling the strap collapses the ring so it can be inserted into the upstream pipe. Once in place, release the strap, allowing tension against the wall of the pipe to hold the ring in place. Pulling on the strap collapses the mounting ring for quick removal.

Standard Features

  • Multi-section installation pole - Easy to transport and assemble.
  • Spring-tension mounting ring holds the sensor securely even in high-velocity flows
  • Seperate sensor carrier not required for mounting an area velocity sensor.

Manufactured by: Teledyne ISCO
Model: Street Level Installation Tool

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance


For installation of:
- Area velocity sensors
- Submerged probes
- Bubble lines
- pH probes
- Dissolved oxygen probes
- Temperature probes


Mounting Rings
Available Sizes 6", 8", 10", 12" and 15"
(150, 200, 250, 300 and 380 mm)
Strap Length 18 feet (5.5m)
Weight (12" ring with strap) 6lbs. (2.7kg)
Materials Type 301 stainless steel, Delrin®, stainless steel hardware, polypropylene strap
Compatible Isco Sensors Area velocity sensors, submerged probes, bubble lines, pH probes, dissolved oxygen probes, temperature probes
Multi-Section Pole
Maximum Length (assembled) 17.75 feet (5.4m)
Maximum Manhole Depth (approximate) 15 feet (4.6m)
Maximum Length (disassembled) 3 feet (0.9m)
Maximum Weight 6.5 lbs. (2.9kg)
Materials Anodized aluminum, Type 304 stainless steel, Delrin



No, all of our flowmeters are competitively priced and rental is an ideal option for cutting costs to a fraction of a full priced new flowmeter.
No problem. The quick start guide is designed to make installing the flow meters a simple task. Everything you require for set up will be found in the peli-box supplied with the flowmeter.
Every flow meter is tested upon shipping and return as part of our ISO9001 procedure. Also, as part of this procedure, the flow meter is calibrated once a year. If a copy of the calibration certificate is needed let us know.
The flow meters typically provide an accuracy of ±1 to 2% of rate, so if you are measuring 100l/sec then the accuracy is between 98-102l/sec.
We are here to help. If the self-help and quick start guides do not help, then call one of our technical support engineers on +44 (0) 1527 882060. We have supplied and supported many clamp on rental installations throughout Europe.
First, contact us for a quote. If you are happy with the quote then send us a purchase order. Or alternatively call us with credit card details and fill out and send us a rental agreement form.
If the stock is permitting, and all paperwork is received by 12pm then flow meters can usually be available the next day.
The minimum hire period for flow meters is one week.
Once you have the meter you can rent it for as long as you need it. However, it would help if you can let us know that you wish to extend the rental period. Upon return the meter is off-hired and once checked and tested, an invoice will be issued to you. Also, if you extend your rental past a 4, 8 or 12 week rental threshold, then you are entitled to a discount.
You are only charged for the period of time for which you have the flowmeter. So, if a flowmeter is returned 3 days late you are only charged for 3 extra days, and each of these days is charged at one fifth of the weeks hire cost.
Normally, you will use your own courier but if you have any problems let us know and we can arrange a pick up the day after you notify us, but you will be charged for the carriage and this cost will be added to the invoice.
Without exception, all our flow meters are tested. If you need a 110v plug instead of the standard 230v plug let us know.
All of our standard transducers will do -40degC to +150degC, but this will depend on your application.
  • Liquid: below 50mm CFLP transducers are required, 50-1000mm CRS-402 transducers and 150-8000mm CRS-401 transducers. All the bits you need can be supplied, and delivered with the meter.
  • Gas: below 80mm CRS-402 is required, for 80-300mm the CRS-401/CRV-310 and for above 300mm the CRW-312 transducers are required.
  • High temperatures: For liquid we can measure +450degC for liquid and for gas/steam +250degC. But please consult RS Hydro.
Of course, we make a small surcharge for each set of transducers. Most applications only require one set, but on occasion some people may require two, for more diverse pipe sizes and applications.
An ultrasonic wall thickness gauge, that measures to within 0.05mm, is provided as standard with all flow meter rental packages.
The screendump facility on the integrated dataloggers on all our flow meters, allows you to photograph any screen and download it to your pc.
After the equipment has been shipped, it is the responsibility of the hirer. However, in our experience it is rare that any of our flow meters are damaged. Our flow meters are tough, as well as accurate, and reliable.
We have hired more ultrasonic clamp on flow meters than any other company in Europe. We are now one of the world's largest distributors of GE Panametrics flow meters. We always review your application before hire so no unwanted surprises are encountered. Every effort has been made to make your flow meter hire and enjoyable experience: quick start guides to help you set up with ease, online videos for further help, rugged packaging for extra durability anywhere, and real flow engineers available for online/telephone support.