The new Panaflow MV 80 is an in-line multivariable vortex flow meter, suitable for measuring mass, temperature and
pressure. Also allows volumetric flow measurement and density. The MV 80 is capable of measuring most qases, liquids and steam without the need to recalibrate.
The in-line multivariable mass vortex flow meters design consists of a vortex shredding velocity sensor, an RTD temperature sensor and a solid state pressure transducer that measures the mass flow rate of steam, gases and liquids. Most meter types measure temperature and pressure at different points as the devices are not generally installed at the same points This can mean that mass flow readings can be extremely inaccurate. The MW 80 measures these parameters at the same location giving more accurate process measurements.
The MV80 is very cost effective as it integrates pressure and temperature with a simplified system. This saves on initial capital costs and also installation costs. All parameters can be sent straight to your data acquisition system, so there is no need to purchase additional instrumentation.
There are a variety of MV80 types available so the user can choose the option with the most suitable configuration to suit their application.
Key Benefits and Features
- Can be used on most gases, liquids and steam without the need to recalibrate
- Measures volumetric flow, temperature, density, pressure and mass flow
- Cost effective
- A reliable way to monitor volumetric and mass flow on smaller pipe ranges from 1/2" to 8"(13mm to 200mm).