ISCO 2102 Wireless Telemetry Modem

  • Remote Data Retrieval 2102 allows remote data retrieval from flow monitoring instruments
  • Low Power Consumption 2 x 6V alkaline batteries can provide power for up to 50 days
  • Provides Two Way Communication Allows two way communication between a laptop and down-hole monitoring equipment
  • Rugged Rugged NEMA 4x, 6P (IP68) case
Product Options

Overview

The 2102 Wireless Module provides remote data retrieval from flow monitoring instruments, reducing the need for confined space entry in sewer flow studies. The 2102 clips onto one or more 2100 series modules forming an integrated system for gathering and communicating open channel flow data.

The 2102 telemetry modem enables a single worker to complete the data retrieval task that may otherwise require a large hazardous entry crew. If you are in range of the monitoring site, you can connect the 2101 to a laptop running Flowlink software and retrieve data from the comfort of your vehicle.

The 2102 telemetry modem gives reliable, direct, two-way communication using spread-spectrum digital radio. As well as 2100 series flow meters it can also be used with 6700 samplers, 4100 series flow loggers and 4200 series flowmeters. Utilising the 2102's "drive-up data retrieval" will also avoid the inconsistencies of conventional radio technology and the monthly expense of using cellular phones.

Standard Features of the 2102 Include:

  • "Plug & Play" setup, no interfacing or engineering required. Just plug in and go.
  • Rugged case (NEMA 4x, 6P, IP68)
  • Low power system means 50 days of battery life using two 6 volt alkaline batteries is typical
  • All equipment can be hidden in the manhole when using a standard internal antenna

Manufactured by: Teledyne ISCO
Model: ISCO 2102 Wireless Telemetry Modem

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Efficient, reliable data
retrieval for flow studies
Applications needing line-of-sight communication from base station to remote monitoring sites

Specification

2102 Wireless Communication Module:
Size (HxWxD) 2.2 x 11.3 x 7.5 in (5.4 x 28.7 x 19.1 cm)
Weight 2 lbs (0.9 kg)
Enclosure (self certified) NEMA 4X, 6P (IP68)
Material High-impact polystyrene
Carrier Detect Cycle 4 minutes
Average Connect Time 2 minutes
Power 10 to 16.6V DC
<1 mA standby, 300 mA maximum
5 mA average at 4 minute power cycle
Typical Battery Life 50 days (with 2 alkaline batteries)
Operating Temperature 0° to 140°F (-18° to 60°C)
Storage Temperature -40° to 140°F (-40° to 60°C)
Software Serial Connection to IBM PC or compatible
computer with Isco Flowlink Software
(version 4.11 or above)
2191 Battery Module:
Size (HxWxD) 6.0 x 9.6 x 7.6 in (15.2 x 24.4 x 19.3 cm)
Weight (w/o batteries) 3.2 lbs (1.4 kg)
Enclosure (self certified) NEMA 4X, 6P (IP68)
Material High-impact polystyrene
Batteries Two 6V alkaline lantern or lead-acid lantern
Alkaline Capacity:
25 A/hrs
Lead-Acid Capacity:
5 A/hrs
Spread Spectrum Radio:
Frequency 902 to 928 MHz
Transmitter:
Output Power 1 Watt
Typical Range Line of sight:
0.5 miles (0.8 km)
From inside manhole:
100 ft (30 m)
Modulation, GFSK 120 kBs - 170 kBs
Occupied Bandwidth 230 kHz
Receiver :
Sensitivity -108dBm at 10-6 raw BER (bit error rate)
Selectivity 40 dB at fc ± 230 kHz
60 dB at fc ± 460 kHz
Data Transmission:
Error Detection 32 Bit CRC, resend on erro
Data Encryption Substitution, dynamic key
Link Throughput 115 kBaud
FCC Identifier KNY-205-108213
DOC (Canada) Identifier 2329 102 336A

Downloads