The SITRANS F C MC2 is available as a standard version (DN 50 to DN 150 (2” to 6”)) and a hygienic, EHEDG-certified version (DN 20 to DN 80 (¾“ to 3“)). MC2 and MC2 hygienic are both suitable for accurate mass flow measurement of a variety of liquids and gases.
The sensor offers superior performance in terms of flow accuracy, turn-down range and density accuracy and delivers true multi-parameter measurements i.e.: mass flow, volume flow, density, temperature and fraction flow .The very compact sensor construction makes installation and commissioning easy and straight forward.
Design
The MC2 sensor consists of 2 parallel measuring pipes, welded directly onto a flow-splitter at each end to eliminate a direct coupling to the process connectors and significantly reduce effects from external vibrations. The sensor is available in 2 material configurations, AISI 316L or Hastelloy C4 with a wide variety of process connections. The flow-splitters are welded onto a rigid sensor housing which acts as a mechanical low-pass filter.
The enclosure is made of stainless steel AISI W 304 1.4301 with an ingress protection rating of IP67/NEMA 4. The sensor is Ex-approved EEx em [ib] IIC. The sensor can be installed (and is self draining in) both a horizontal or vertical position. The MC2 is designed for increased safety and can therefore only be connected to: MASS 6000 19" or SIFLOW FC070 Ex standard versions which have to be remote mounted in the safe area. For all non-hazardous applications the complete MASS 6000 transmitter program can be used, though only remote mounted.
Benefits
- High accuracy - better than 0.15% of mass flow rate
- Large dynamic turn-down range
- Space-saving split-flow sensor design facilitating low pressure loss
- Parallel S-tube design and optimal oriented inductive sensors enhances accuracy and turn-down range
- Densitometer performance available through a density accuracy better than 0.001 g/cm3
- Self-draining in both horizontal and vertical position
- Rigid enclosure design reduces the influence from pipeline vibration and thermal stress
- 4-wire Pt100 temperature measurement ensures optimum accuracy on mass flow, density and fraction flow
- SENSORPROM enables true "plug & play". Installation and commissioning in less than 10 min
- Safe Ex-design EEx em [ib] IIC.
- The sensor calibration factor is also valid for gas measurement.
- Sensor pipe available in high-quality AISI 316L stainless steel W 1.4571 or Hastelloy C4 W 2.4610 offering optimum corrosion resistance
|
|---|
| Quantity |
|
|
|