The Model 107 TLC Meter is the ideal meter for profiling conductivity in open water and wells and for saltwater intrusion, salinity investigations and contamination. Accurate temperature and conductivity readings are displayed on the rotating LCD screen for ease of reading.
The TLC uses a ‘smart’ conductivity sensor with platinum electrodes to measure conductivity between 0 – 80,000 μS/cm providing an accuracy of 5% of reading or 100 μS (whichever is greater). The conductivity sensor can be calibrated using 1413 μS, 5000 μS, 12,880 μS, and/or 80,000 μS solutions for 1, 2, 3, or 4 point manual conductivity calibrations.
Water level and probe depth measurements are read off the Solinst durable PVDF flat tape, which is accurately laser marked every 1/100 ft or each millimeter. Tape lengths are now available up to 1000 ft (300 m).
When the zero point of the probe enters the water, the light and buzzer are briefly activated. The depth to water and depth of displayed readings are read off the tape. The 9V alkaline battery provides up to 90 hours of use and is housed in an easy access battery drawer.
Features
- Conductivity, level and temperature measurement
- Display that rotates for easy reading
- Auto-Off after 8 minutes
- Fast response time
- Easy to use
- Rugged design and accurate tape
- Accuracy is to the greater of 100 µS or 5% of reading
- Standard 9V alkaline battery gives 90 hours of use
- Lengths to 1000 ft. (300 m), probe dia. is 3/4" (19 mm)
Applications
- Profiling conductivity and temperature in wells and open water
- Saltwater intrusion monitoring
- Tracer tests
- Salinity studies
- Testing for water quality impairments from road salt
- General indication of chemical contamination level
- Early warning of changes in water quality at:
- Industrial sites
- Landfills
|
|---|
| Quantity |
|
|
|