ISCO Signature Open Channel Flow Meter

Signature Flow Meter

  • Unique Data Verification Logs changes in calibration and power outages to validate data accuracy
  • Flow Measurement Technology Supports flow measurement technologies including bubbler and ultrasonic
Product Options


The new Isco Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including ultrasonic and bubbler. Flow can be calculated using standard open channel level-to-flow conversions, level to flow data points as well as user-defined equations, depending on the needs of the application.

Unique features provided by the Signature flow meter help to verify data integrity. It logs key events such as power outages and changes in calibration to validate data accuracy. Stored data can be easily reviewed to detect any type of data alteration.


The Isco Model 310 Ultrasonic Level Sensor, 330 Bubbler Module, 350 Velocity Sensor and 360 LaserFlow™ Velocity Sensor are now MCERTS certified meeting the Environment Agency's performance requirements. View downloads for certificate.

Manufactured by: Teledyne ISCO
Model: Signature Flow Meter

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance


Industrial Pretreatment Compliance
Permit Enforcement
Wastewater Treatment Plants


Size (HxWxD) 8.88 x 12.22 x 8.22 in. (with mounting bracket)
Materials of Construction PPO Polyphenylene Oxide
Enclosure (self-certified) NEMA 4X/IP66
Power Required 100 to 240 VAC 50/60 Hz
Cable Entry Standard: 3/4" NPT conduit
Optional: 3/4" NPT cord grips
Flow Measurement Technologies Ultrasonic (TIENet 310)
Bubbler (TIENet 330)
Inputs Two SDI-12
pH Measurement (TIENet 301)
Setup Front Panel Keypad
Flowlink Software - with serial USB, remote cellular, or Ethernet
Flow Conversions Weir, Flume, British Flume, Metering Insert, Manning
Formula, Equation, Level to Flow Data Points
Data Storage Non-volatile flash; retains stored data during program updates. Capacity: 512 KB
Interval: 15 or 30 seconds; 1, 2, 5, 15, or 30 minutes; or 1, 2, 4, 12, or 24 hours
Capacity: 180 days with 5 parameters logged at 1 minute intervals, reports once per day
Data Retrieval USB drive
Flowlink Software - with serial USB, remote cellular, or Ethernet
Analog (TIENet 308)
SMS Alarm
Sampler Interface TIENet 306
Communication Options CDMA or GSM cellular, Ethernet
Temperature Range: Operating and Storage -20 to 60°C (-4 to 140°F)
TIENet™ 301 pH/Temperature Device
Weight (w/o probe) w/ 10m cable: 3.5 lb
w/ 23m cable: 7.5 lb
Ambient Operating Temperature -20 to 50°C (-4 to 122°F)
pH Measurement Range 0 - 14 pH units
Temperature Compensation Performed by the 301 device
pH Accuracy ±0.1 pH units (new probe, freshly calibrated w/in range)
Probe Dimensions 1.12" Ø X 6" long, 3/4 NPT; Cable 25ft
Probe Body Material 316SST
pH Electrode Junction Double porous
Temperature Measurement Range 0 to 80 °C (32 to 176 °F)
TIENet™ Model 306 Sampler Interface
Function Flow pacing, enabling based on triggered event. Time and bottle information sent to Signature Flow Meter
Powered By Signature Flow Meter
Operating Temperature -20 to 50°C (-4 to 122°F)
Storage Temperature -40 to 60°C (-40 to 140°F)
Pulse Width 50 ms
Pulse Output 5 volts
Sampler Connection Standard: 6 pin connector for Isco 6712, Avalanche, Glacier, GLS, and 3700 samplers
For other options, contact factory
TIENet™ Model 308 Analog Output
Output 4-20 mA
Isolation Monolithic
Maximum Load 500 ohm
Outputs per card Two
TIENet™ Model 310 Ultrasonic Level Sensor
Level Measurement Range 0.3 to 3.3m (1 to 11 ft)
Measurement Accuracy at
72°F (22°C)
±0.006m (0.02 ft) at 1 ft level change or less
±0.009m (0.03 ft) at greater than 1 ft level change
Temperature Coefficient
(w/ in compensated range)
±0.0002 x Distance (m) x Temperature Deviation from 22 °C.
±0.00011 x Distance (ft) x Temperature Deviation from 72 °F.
Beam Angle 10°
Frequency 50 kHz
Size 9.1 cm Ø X 10.2 cm tall (3.63" x 4")
Cable Length 10 or 23m (32.8 or 75.5 ft)
Weight 1.8 kg (4 lbs)
Body Material PVDF
Temperature Range
(Operating & Storage)
-30° to 60°C (-22° to 140°F)
Certifications Group 2, Category 1G (zone 0), T4
Class I, Div 1, Groups C & D, T4 (pending)
TIENet™ 330 Bubbler Module
Level Measurement Range 0.003 to 3.05m (0.01 to 10 ft)
Level Measurement Accuracy +0.002m @ 22°C (0.007 ft @ 72°F)
Operating and storage
-18° to 60°C (0 to 140°F)
Compensation Range
0° to 60°C (32° to 140°F)
Temperature Coefficient
(w/ in compensated range)
±0.0003 x Level (m) x Temperature Deviation from 22 °C.
±0.00017 x Level (ft) x Temperature Deviation from 72 °F.




Yes, the ordering process is very easy. Orders can be made via purchase order or by credit/debit card. Once we have the paperwork we can delivery next day to any location in Europe. Provided with the equipment is a quick start guide, and if you need extra support, the technical support engineers can be contacted via phone call.
Every flow meter is tested upon shipping and return as part of our ISO9001 procedure. Also, as part of this procedure, the flow meter is calibrated once a year. If a copy of the calibration certificate is needed let us know.
We are here to help. If the self-help and quick start guides do not help, then call one of our technical support engineers on +44 (0) 1527 882060. We have supplied and supported many clamp on rental installations throughout Europe.
If the stock is permitting, and all paperwork is received by 12pm then flow meters can usually be available the next day.
Without exception, all our flow meters are tested. If you need a 110v plug instead of the standard 230v plug let us know.
As long as the pipe is relatively clean, coatings or paint is usually not a problem for clamp on flow meters but if the pipe is corroded or the paintwork has bubbled then a quick sanding down with sandpaper or a wire brush is recommended.
An ultrasonic wall thickness gauge, that measures to within 0.05mm, is provided as standard with all flow meter rental packages.
The screendump facility on the integrated dataloggers on all our flow meters, allows you to photograph any screen and download it to your pc.