The PT2X groundwater data logger is a submersible integrated temperature and water level data logger ideal for groundwater monitoring and water level monitoring projects.
It is suitable for a wide range of applications including:
The PT2X groundwater water level datalogger is available in absolute, gauge or sealed gauge versions and also comes with a choice of datalogging capabilities between 130,000 records, 260,000 records and 520,000 records. A variety of cable options are available - polyethylene, polyurethane or PTFE/FEP.
The PT2X groundwater data logger has a rugged construction and is built from 316 stainless steel, Viton and PTFE/FEP and has a diameter of just 0.75". A titanium construction is optional.
It is powered by two internal AA batteries and has the option of an external 12VDC power supply.
The groundwater datalogger stores its data in non volatile memory, ensuring no data is lost in the event of power failure.
The easy to use Aqua4Plus software allows the user to be up and running in minutes. Data can be viewed in real time and also exported to spreadsheets and databases.
Aqua4Push Data Upload Utility is available for automatic scheduled data collection from multiple sensors with optional FTP upload.
Other features:
Manufactured by: INW
Model: PT2X Groundwater Data Logger
River, stream and reservoir gauging
Pump and slug tests
Stormwater runoff monitoring
Well, tank and tidal levels
Wetland monitoring
GENERAL | |
Length | 11.875" (30.2 cm) cabled 11.625" (29.5 cm) cableless |
Diameter | 0.75" (1.9 cm) |
Weight | 0.8 lb. (0.4 kg) |
Body Material | Delrin® & 316 stainless steel or titanium |
Wire Seal Material | Viton® and PTFE/FEP |
Submersible Cable | Polyurethane, polyethylene, or FEP available |
Protection Rating | IP68, NEMA 6P |
Desiccant | 1-3 mm indicating silica gel (high or standard capacity) |
Terminating Connector | Available |
Communication | RS485 Modbus® RTU SDI-12 (ver.1.3) |
Direct Modbus Read Output | 32-bit IEEE floating point |
SDI-12 Output | ASCII |
Internal Math | 32-bit floating point |
Operating Temp. Range3 | -15° C to 55° C |
Storage Temp. Range1 | -40° C to 80° C |
LOGGING | |
Memory | 4MB - 520,000 records |
Log Types | Variable, user-defined, logarithmic, profiled |
Programmable Baud Rate | 9600, 19200, 38400 |
Logging Rate | 8x/sec maximum |
Software | Complimentary Aqua4Plus or Aqua4Push |
Networking | 32 available addresses per junction w/ batching capabilities (up to 255) |
File Formats | .xls / .csv / .a4d |
POWER | |
Internal Battery | 2x1.5V AA alkaline2 |
Auxiliary Power | 12 VDC - Nominal 6-15VDC - Range |
Exp. Alkaline Battery Life | 18 months at 15m polling interval6 |
TEMPERATURE | |
Element Type | Digital IC on board |
Accuracy | ± 0.5° C |
Resolution | 0.1° C |
Range | -40° C to 80° C |
Units | Celsius, Fahrenheit, Kelvin |
PRESSURE | |
Transducer Type | Silicon strain gauge |
Transducer Material | 316 stainless steel or titanium |
Pressure Ranges | Gauge FtH2O5 - 2.3, 5.8, 12, 35, 69, 115, 231, 692 mH2O5 - 0.7, 1.75, 3.5, 10.5, 21, 35, 70, 210 Absolute FtH2O5 - 46, 69, 115, 231, 692 mH2O5 - 14, 21, 35, 70, 210 |
Units | PSI, FtH2O, inH2O, cmH2O, mmH2O, mH2O, inHg, cmHg, mmHg, Bars, mBars, kPa |
Static Accuracy | ± 0.05% FSO (typical) ± 0.1% FSO (maximum) (B.F.S.L. 20° C) |
Resolution | 0.0034% FS (typical) |
Maximum Operating Pressure | 1.1 x FS |
Burst Pressure4 | 3.0 x FS |
Compensated Range | 0° C to 40° C |
1 Storage without batteries 2 Lithium available upon request 3 Requires freeze protection kit if in water below freezing 4 Burst reduced at PSI>300 5 Higher pressure ratings available upon request 6 May vary due to environmental factors |
Leveloggers. Provides detailed information on the datalogger,
and includes options for running a self-test, doing a memory
dump and creating/emailing reports.