3001 LTC Levelogger Edge, M10 - C80 (Discontinued)
- Conductivity, Temperature & Depth All in one with integral datalogger (16,000 data points)
- Cost-effective CTD from Solinst 5-year battery life.
- Salt water intrusion, groundwater monitoring, landfill leachate monitoring
- Agricultural and stormwater runoff monitoring
Overview
PRODUCT DISCONTINUED - REPLACED BY THE LTC LEVELOGGER EDGE
The LTC Levelogger Junior conductivity datalogger (CTD) measures conductivity, temperature and depth all in one CTD device. It combines all three parameters within one conductivity data logger and has a 5 year battery life, memory capacity for 16,000 sets of readings in a small waterproof housing. Like the Levelogger Junior water level datalogger, it is very easy to program as well as being very small and easy to deploy in a range of environments and applications.
The LTC conductivity datalogger is totally compatible with Levelogger Software and all accessories as well is being able to be integrated into telemetry systems.
The 4-poll electrode platinum conductivity sensor has auto-ranging capabilities. The sealed conductivity data logger requires minimal maintenance and is simple to clean and calibrate, even in the field. Copper wire surrounds are also available to prevent algal/molusc growth around the sensor.
The Solinst CTD displays conductivity, temperature and temperature-compensated water level when using the standard Levelogger Software. The data logger can also record up to 16,000 sets of data readings. Measurements are linear and are taken at user defined intervals between 5 seconds and 99 hours.
Features
- Low cost convenience
- Conductivity, Level and Temperature data logging
- Conductivity range 0-80,000µS/cm
- 5 year battery life
- 2% accuracy
- Data storage for 16,000 data points
- Real-time viewing and data export to other programs
- SDI-12 compatible
- Compatible with Levelogger Software, accessories, and STS Gold Telemetry Systems
Manufactured by: Solinst
Model: 3001 LTC Levelogger Edge, M10 - C80 (Discontinued)
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
Applications
Salt water intrusion and soil salination monitoring
Plume remediation monitoring studies
Leachate monitoring at landfills, mine tailings, waste disposal storage sites and more
Agricultural and stormwater runoff monitoring
Tracer tests
Specification
| Level Sensor: | Piezoresistive Silicon with Hastelloy Sensor |
| Ranges | F30/M10, F100/M3 |
| Accuracy (typical) | 0.1% FS |
| Resolution | 0.08" (0.2 cm), 0.24" (0.6 cm) |
| Normalization | Automatic Temp Compensation |
| Temperature Sensor: | Platinum RTD |
| Accuracy | ± 0.1°C |
| Resolution | 0.1°C |
| Temp Compensation Range | 10°C to 40°C |
| Conductivity Sensor: | 4-Electrode Platinum |
| Full Range | 0 - 80,000µS/cm |
| Accuracy | 2% of reading or 20µS/cm |
| Resolution | 1 µS |
| Temp. Compensation Range | 0°C to 40°C |
| Normalization | Specific Conductance @ 25°C |
| General: | |
| Battery Life | 5 Years (5 minute sampling rate) |
| Clock Accuracy | ± 1 minute/year from 0 to 40°C |
| Operating Temperature | - 20°C to 80°C |
| Memory | Non-volatile EEPROM, FRAM back-up |
| Maximum Readings | 16,000 sets of readings |
| Communication | Optical Infra-red: USB, RS232, SDI-12 |
| Size | 7/8" x 7.5" (22 mm x 190 mm) |
| Weight | 7.05 oz. (200 grams) |
| Wetted Materials | Platinum, 316L Stainless Steel, Delrin® , Viton® |
| Sampling Mode | Linear, (5 sec to 99 hrs), Real Time View |
| Barometric Compensation | Software Wizard and Barologger Edge |
Downloads
Accessories
Related products
FAQ's
The free app is available on both Apple® and Android™ smart devices.
Apple devices must be running iOS 11 or later on the following compatible devices:
- iPhone
- iPad
- iPad mini
- iPod touch.
Android devices must be running version 5.0 or higher. Solinst does not guarantee compatibility on all devices running 5.0, but testing confirms the following can be used:
- Phone: Samsung Galaxy S4 - Model SGH-1337M
- Phone: Samsung Galaxy S5 - Model SM-G900W8
- Tablet: Samsung Tab 4 (10.1”) - Model SM-T530NU
As the Levelogger App Interface will not connect directly to the top of a Solinst datalogger, it is necessary to have connection accessories. With the Levelogger or Rainlogger, one of the following accessories is required:
- Direct Read Cable, clients use this option to suspend dataloggers in the field when they wish to communicate downhole.
- When working with Leveloggers that are suspended from wireline, or cord, the units must be removed from the well and connected to either a Direct Read Cable (as above) or an Optical Adaptor.
- For the LevelVent, just connect to the unit via the Vented Cable and LevelVent Wellhead that all units are suspended from in the field – no other connection accessories are required.
- The AquaVent communication connection is made from the App Interface to the AquaVent Wellhead using an App Connector Cable that is ordered separately.
- Program and start dataloggers in the field.
- Simplify data management in the field by transporting and using less equipment.
- View real-time readings.
- Download and e-mail logged data files.
- Calibrate LTC Leveloggers (NEW).
- Run the diagnostic utility (NEW) – used for troubleshooting
Leveloggers. Provides detailed information on the datalogger,
and includes options for running a self-test, doing a memory
dump and creating/emailing reports.